Unverified50% confidenceCautionExact time
The Raspberry Pi GPIO input voltage must not exceed 3.3V, and connecting a 5V signal directly may damage the pin.
1
Sources
50%
Confidence
Long-term
Relevance
11/11/2026
First Seen
Sources
Giving a Toilet an IP Address with a Raspberry Pi: An Absurd Yet Hardcore IT Experiment
youtubeNetworkChuck11/11/2026
Related Entities
Related Claims
UnverifiedThe Raspberry Pi GPIO has a built-in weak pull-up resistor of about 50kΩ, which can hold the pin's default state stably at a 3.3V high level; when an external switch closes to ground, the pin is pulled low to 0.75% similarUnverified树莓派GPIO引脚最大输出电流仅约16mA,不足以直接驱动电机,需要继电器或H桥驱动芯片如L298N66% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/1160837API
curl https://kongchang.com/api/v1/knowledge/claims/1160837MCP
get_claim(id=1160837)