Unverified80% confidenceDecision RuleTime unknown
拉链头挂锁需确认拉链头孔径与锁梁匹配，常见行李箱拉链头孔径为5-8mm，锁梁过粗会穿不进拉链孔
1
Sources
80%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified挂锁式行李箱锁需确认锁梁直径≤6mm且拉链头孔径能穿过，主流箱包拉链头孔径约4-5mm，锁梁过粗会导致无法上锁91% similarUnverified拉链锁需匹配双拉链头的挂孔孔径，市面通用挂锁锁梁直径2.5-4mm可穿过大多数拉链头，超粗锁梁穿不进小拉链孔89% similarUnverified使用前需确认锁钩（锁梁）直径与行李箱拉链孔尺寸匹配，部分硬壳行李箱拉链头孔较小，可能导致锁钩无法穿入88% similarUnverified选外挂锁前需测量拉链头孔径与锁梁匹配度：普通双拉链头孔约需锁梁能穿过两个拉链孔（间距通常20-40mm），选锁梁开口宽度≥40mm的长梁款才能同时锁住两个拉链头86% similarUnverified选购粘贴式安全锁时，锁扣张开角度决定适用缝隙：直角柜门（缝隙<5mm）需选U型或J型锁扣，L型转角柜或缝隙>10mm的需选可弯折/可调节长度的绑带式锁78% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/133874API
curl https://kongchang.com/api/v1/knowledge/claims/133874MCP
get_claim(id=133874)