Unverified80% confidenceDecision RuleTime unknown
接收贴片厚度应≤0.5mm，超过0.8mm会导致原有手机壳无法正常盖合或贴片凸起，选购时优先看是否标注'超薄FPC软排线'
1
Sources
80%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified手机背贴需选厚度≤0.15mm的超薄膜料，超过0.2mm会导致套壳后鼓包或壳边卡不进86% similarUnverified购买手机膜时厚度以0.3mm左右为宜：过薄易碎且防摔差，过厚（0.4mm以上）影响触控灵敏度并使全面屏边缘顶手，同时确认膜的开孔适配前摄、听筒和屏下指纹78% similarUnverified购买Type-C防尘塞需确认插头厚度≤1.5mm，部分带保护壳的手机充电口内凹，过厚的塞体会导致无法完全插入或反复拔插时脱落78% similarUnverified折叠收纳厚度≤3mm的超薄支架才能与手机一同放入紧身裤或钱包卡位，超过5mm会明显硌手且失去'超薄'意义78% similarUnverified选购前确认最大兼容宽度≥手机带壳后的实际宽度，多数支架标称兼容4.7-7寸，但厚保护壳或磁吸壳会额外增加5-10mm，实测厚壳大屏机型常超出夹持上限76% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/134681API
curl https://kongchang.com/api/v1/knowledge/claims/134681MCP
get_claim(id=134681)