Unverified90% confidenceFactTime unknown
把套内径需匹配把横直径，标准直把为22.2mm，握把标注内径应为22.2mm；错配会导致打滑或无法安装
1
Sources
90%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified仅适配23.8mm（标准公路弯把）把径，不能直接安装在22.2mm的平把或部分非标弯把上82% similarUnverified仅适配标准22.2mm把管直径，购买前需确认车把夹持区外径是否为22.2mm，部分超大径或非标车把不兼容81% similarUnverified适配标准22.2mm把径，购买前需确认车把外径是否为标准尺寸；若使用oversized（如31.8mm裸管段）或特殊把径车把则无法安装81% similarUnverified仅适配22.2mm标准把径，购买前需确认车把直径；若为31.8mm或25.4mm超大径车把则无法使用80% similarUnverified衣柜横杆直径主流为25mm/32mm两种，挂架的卡扣内径须≥横杆直径2mm留出活动空间，购买前用卷尺测量横杆而非估算，直径不符会导致挂架晃动或卡不上80% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/136957API
curl https://kongchang.com/api/v1/knowledge/claims/136957MCP
get_claim(id=136957)