Unverified82% confidenceDecision RuleTime unknown
户外及长期使用应看厚度而非只看长度，标准PVC电工胶带厚度0.13mm~0.18mm为宜，低于0.10mm的超薄胶带缠绕数圈仍易被划破漏电
1
Sources
82%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified厚度与拉伸的关系：优质PVC电工胶带厚度约0.13~0.18mm，可拉伸至原长的150%~200%仍不断裂；厚度低于0.1mm的廉价胶带拉伸易断、绝缘性能不达标89% similarUnverified静电贴厚度通常0.15-0.3mm，太薄（<0.1mm）易褶皱难对齐、复用寿命短；选0.2mm以上PVC静电膜更挺括耐揭86% similarUnverifiedPVC装饰膜常见厚度分级：0.08mm以下为薄款贴合易但遮盖弱，0.10-0.12mm为常规款，0.15mm以上为加厚款遮盖强但转角处不易贴伏86% similarUnverified标准电工胶带厚度约0.13-0.18mm，拉伸率需达到200%以上才能贴合缠绕导线弯曲处，厚度过低（＜0.1mm）易破损漏电84% similarUnverified胶带厚度0.13-0.18mm为电工标准规格，兼顾绝缘强度与缠绕贴合性；<0.1mm的超薄款绝缘余量不足，>0.2mm的厚款缠绕接头易鼓包不服帖83% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/138464API
curl https://kongchang.com/api/v1/knowledge/claims/138464MCP
get_claim(id=138464)