Unverified82% confidenceDecision RuleTime unknown
卡扣式反光条须匹配辐条直径：普通钢丝辐条约1.8-2.0mm选标准卡口，扁辐条（刀条）须选专用夹片款，否则无法固定或高速甩脱
1
Sources
82%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified反光条式辐条反光件需匹配辐条直径：普通钢丝辐条多为2.0mm（14G），扁辐条则需专用夹片，选购前测量辐条截面，圆辐条件不能强行卡装扁辐条93% similarUnverified隐形防护网（钢丝绳款）应选择钢丝直径≥2.5mm且外包PVC/尼龙涂层，钢丝间距≤10cm；单纯依赖钢丝细看似美观但3mm以下钢丝长期承力易松弛下垂79% similarUnverified隐形防护网（钢丝绳款）单根钢丝直径应≥2.5mm且带PVC/PE包塑层，钢丝间距≤10cm；相比传统栏杆更通透美观，但张力松弛后需定期检查复紧79% similarUnverified隐形防护网（金刚网/钢丝绳网）钢丝直径应≥2.5mm、间距≤10cm，边框铝材壁厚≥1.2mm，验收时应做手动拉拽和局部承重测试确认卡扣未松动77% similarUnverified钢丝网格拼接架的标准片规格多为45cm×45cm或35cm×45cm，钢丝直径3-4mm为承重款、2mm为轻量款，连接采用塑料扣或钢扣角件76% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/147113API
curl https://kongchang.com/api/v1/knowledge/claims/147113MCP
get_claim(id=147113)