Unverified88% confidenceDecision RuleTime unknown
深框轮组(≥40mm)需选气嘴长度60mm以上的法嘴内胎，或使用气嘴延长杆，标准42mm气嘴无法露出打气
1
Sources
88%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified气嘴长度需匹配轮组框高，低框轮组选42mm即可，中高框（40-50mm）选60mm，高框（50mm以上）必须选80mm，否则气嘴露出不够无法正常打气90% similarUnverified购买内胎前必须确认气嘴长度：深框轮组（框高≥40mm）需选48mm或60mm长气嘴，否则气嘴露出不足无法充气，标准框高32mm以下用40mm即可90% similarUnverified气嘴长度需匹配轮圈高度：轮圈框高≤30mm选40mm气嘴，40-50mm框高选60mm气嘴，气嘴外露螺纹应有15mm以上以便打气头夹紧89% similarUnverified气嘴长度需匹配轮组框高，42mm适合低框，60mm适合中框（约40-50mm框高），80mm适合高框；若框高超过气嘴露出长度则无法正常打气88% similarUnverified内胎气嘴长度需综合轮圈框高选择：低框轮圈（<30mm）选32-40mm气嘴，中框（30-45mm）选48-60mm，深框（>50mm）选60-80mm或用延长杆；气嘴过长在低框轮上会导致夹头晃动漏气88% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/147730API
curl https://kongchang.com/api/v1/knowledge/claims/147730MCP
get_claim(id=147730)