Unverified85% confidenceDecision RuleTime unknown
标签尺寸不仅要看纸面尺寸，还要确认底纸宽度是否在打印机进纸范围内，且标签间距(gap)需匹配打印机传感器，否则出现走纸错位或空打
1
Sources
85%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified标签宽度必须匹配标签机最大打印宽度，超宽会卡纸；连续纸和定位孔（间隙/黑标）模式也需与机器设置一致，否则打印错位89% similarUnverified标签纸宽度与色带/机型的最大打印宽度需匹配，纸宽超过打印头会漏印边缘，纸宽过窄会导致定位孔/间隙检测失败卡纸87% similarUnverified230g克重偏厚，部分入门级喷墨打印机后进纸通道可能出现卡纸，购买前需确认打印机支持的纸张克重上限77% similarUnverified刻度线间距误差应控制在±1mm以内，印刷型墙贴尺易因印刷偏差和粘贴拉伸导致刻度不准，选购时应确认是否标注实测校准，或选择带独立刻度贴条而非整体拉伸型的款式77% similarUnverified标签规格与打印/手写机适配是常见坑：A4整张不干胶需匹配软件模板行列数(如70×42mm=21格/张)，先确认现有模板再买尺寸可避免错位77% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/156046API
curl https://kongchang.com/api/v1/knowledge/claims/156046MCP
get_claim(id=156046)