Unverified85% confidenceDecision RuleTime unknown
承重设计需保证垫片实际压缩量在其厚度的10%-25%之间，压缩不足（＜10%）隔振不充分，过压（＞30%）橡胶变硬失去弹性并加速蠕变
1
Sources
85%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified卷口封口设计需要留出足够的卷折余量（通常至少3-4次卷折）才能保证防水密封，实际可用容量会小于标称容量78% similarUnverified百褶裙的褶裥密度决定垂坠感：细密压褶（每褶2-3cm）显瘦但活动受限，宽褶（5cm以上）飘逸但显膨胀，微胖优先选细密压褶且带定型工艺的77% similarUnverified吸附密封强度与厚度正相关，主流保鲜盖厚度1.5-2mm，低于1mm的产品密封力弱、易变形松弛，倒置无法防漏；追求防漏建议选加边卷边加厚设计77% similarUnverified约5cm宽涤纶带体牢固耐磨，但弹性有限，捆绑前需根据箱体尺寸调整好长度，过长会松垮、过短则扣不上77% similarUnverified厚度选择需匹配安装间隙压缩率：硅胶垫在螺丝锁紧下压缩10-30%效果最佳，间隙0.5mm选0.5-0.6mm垫，过厚会导致器件受力翘曲76% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/167101API
curl https://kongchang.com/api/v1/knowledge/claims/167101MCP
get_claim(id=167101)