Unverified80% confidenceDecision RuleTime unknown
夹持式支架的夹口内衬需有硅胶/海绵防刮层，且夹持范围应比设备厚度留2-3mm余量（带壳时需重新测量），否则易划伤边框或夹不牢
1
Sources
80%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified厚度1.5-2mm的硅胶垫兼顾防滑与易清洁；低于1mm易卷边翘角、难以平铺贴合，高于3mm则边缘易积灰且难折叠收纳88% similarUnverified耐用度看接缝和材质厚度：一体成型注塑或无缝硅胶比拼接款耐用，反复捏压部位单壁厚度≥2mm不易破漏，充液/充砂款一旦破损无法修复85% similarUnverified2mm硅胶厚度在同类产品中属中等偏厚，防刺穿和耐磨表现较薄款更好，但折叠后体积也相应偏大，包袋空间有限时需注意84% similarUnverified增高越厚支撑越足但越不稳定，8cm以上厚垫必须配底部硅胶防滑颗粒或绑带固定，否则起身时易滑动83% similarUnverified带防滑硅胶底垫的分隔格能防止开关抽屉时格子滑动，但底垫会占用1-2mm高度且难清洗；无底垫款需靠尺寸卡紧或双面胶固定83% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/187860API
curl https://kongchang.com/api/v1/knowledge/claims/187860MCP
get_claim(id=187860)