Unverified82% confidenceCautionTime unknown
桌板厚度＜18mm或为空心/薄板密度板的桌子不建议用C型夹支架，夹持点受力集中易导致桌面开裂或凹陷，应改用穿孔式并加装大面积垫片
1
Sources
82%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified夹持式（C型夹）安装要求桌面厚度10-60mm且桌沿留出足够空间，玻璃桌面或悬浮桌面（下方无实体支撑）不能用夹式，需改用打孔穿桌式或另配桌面加固板89% similarUnverified夹桌式（C型夹）键盘托架要求桌面板厚度在20-60mm范围内，超薄玻璃桌或厚度＞60mm的实木桌无法夹紧，需改用底座压重款或螺丝固定款89% similarUnverified夹持式(C-clamp)要求桌面厚度通常10-60mm且桌沿有5-8cm空间，钢化玻璃桌面或超薄岩板桌面(＜10mm)不能用夹式，需选打孔式(Grommet)或改用桌面立柱88% similarUnverified夹装式（C-clamp）要求桌面厚度10-60mm且桌面为实心非悬空，穿孔式（Grommet）需要桌面预留孔位或可打孔；玻璃桌面、悬空桌沿、抽屉正上方的桌面均不适合夹装87% similarUnverified不适合桌板厚度过厚（超过约10cm）或过薄（低于约1cm）的桌子，夹钳无法正常固定86% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/188609API
curl https://kongchang.com/api/v1/knowledge/claims/188609MCP
get_claim(id=188609)