Unverified86% confidenceDecision RuleTime unknown
桌下走线量大（≥6根）优先选带盖线槽或磁吸理线盒，而非单孔理线夹；单孔夹每个仅容1-3根，数量多会显杂乱且难以后期增减
1
Sources
86%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified分格盒的隔板缝隙应≤0.5mm或采用完全封底独立小格，缝隙过大时1x1/圆片等薄小件会卡入或漏至邻格，选购时优先注塑一体成型格盒而非插板式76% similarUnverified容量越大盒身越深，但深盒在垂直磁吸时重心外移、力矩增大，反而更易脱落；垂直吸附场景优先选宽而浅（深度≤6cm）的扁盒76% similarUnverified收纳数据线、充电头等杂物选可自由拆卸分隔板的格位盒，固定格位盒会因线材长度不一浪费空间，建议格位深度≥5cm以容纳缠绕收纳的线材75% similarUnverified选盒容量时按插排长度而非设备数量算：多数长条插排需30cm以上内部长度，短盒放不下会导致盖子合不拢，购买前实测插排尺寸73% similarUnverified颗粒分类收纳优先选内部隔层间距8-15mm可调的抽屉盒，8mm格适合1x1圆片/薄板，15mm格适合1x1砖及以上，间距不可调的盒子会导致小颗粒混入大格难以取用73% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/215607API
curl https://kongchang.com/api/v1/knowledge/claims/215607MCP
get_claim(id=215607)