Unverified88% confidenceDecision RuleTime unknown
夹持式（C型夹）固定要求桌面厚度在10-60mm之间且桌面边缘至少留出可夹持的实心区域；打孔穿透式固定更稳但需桌面可打孔，玻璃桌面或悬空异形桌面只能用夹持式并需确认桌面无内凹造型
1
Sources
88%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified夹装式（C-clamp）要求桌面厚度10-60mm且桌面为实心非悬空，穿孔式（Grommet）需要桌面预留孔位或可打孔；玻璃桌面、悬空桌沿、抽屉正上方的桌面均不适合夹装90% similarUnverified夹持式（C型夹）安装要求桌面厚度10-60mm且桌沿留出足够空间，玻璃桌面或悬浮桌面（下方无实体支撑）不能用夹式，需改用打孔穿桌式或另配桌面加固板89% similarUnverified桌面夹固定方式优先选C型夹（螺旋压紧）而非嵌入式打孔，夹口开口需≥5.5cm以适配加厚桌板，超薄玻璃桌面反而选带硅胶垫的夹式防打滑89% similarUnverified夹持式(C-clamp)要求桌面厚度通常10-60mm且桌沿有5-8cm空间，钢化玻璃桌面或超薄岩板桌面(＜10mm)不能用夹式，需选打孔式(Grommet)或改用桌面立柱87% similarUnverified夹持式（C-clamp）安装要求桌面厚度通常在1-8cm范围且桌沿留有夹持空间，钢化玻璃桌面或抽屉紧贴桌沿的桌子无法安装86% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/224926API
curl https://kongchang.com/api/v1/knowledge/claims/224926MCP
get_claim(id=224926)