Unverified85% confidenceDecision RuleTime unknown
承载显示器增高的置物架需台面承重≥20kg且板材厚度≥15mm，钢木结构比纯木质抗形变更好，避免中间下沉
1
Sources
85%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified承重能力看层板材质与跨度：颗粒板层板跨度超过80cm时承重会明显下降，放置显示器+主机+功放的层板应选实木多层板或跨度≤60cm的颗粒板，单层承重需≥30kg84% similarUnverified承重不足的层板放置多台主机+功放会下弯变形，木质层板跨度超过60cm且承重需求>15kg时应选钢制层板或加中间支撑，钢化玻璃层板注意标称承重多为均布承重非点承重82% similarUnverified层板厚度选择：18mm板材跨度控制在75cm内、25mm可到100cm、实木可到120cm，跨度越大越需厚板防挠曲82% similarUnverified隔板厚度直接影响承重：实木/多层板隔板厚度18mm以上抗弯性明显优于15mm以下，长跨度（宽度＞80cm）隔板中间无支撑时应选18-25mm厚板并加中间托81% similarUnverified板材厚度与承重正相关：实木隔板厚度<1.8cm在跨度超过60cm时中间易下垂，长隔板（80cm以上）应选厚度≥2.5cm或中间加装支撑80% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/226110API
curl https://kongchang.com/api/v1/knowledge/claims/226110MCP
get_claim(id=226110)