Unverified80% confidenceFactTime unknown
3M胶粘贴款需在光滑干净表面静置24-48小时后再承重，且环境温度低于10℃时胶体固化差、初期粘性显著下降，冬季安装需辅助加热或延长等待
1
Sources
80%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified粘贴式底座（曲面/平面3M胶）安装前表面温度需≥20℃并静置24小时后再使用，低温或立即上力会大幅降低粘性导致脱落89% similarUnverified3M胶粘贴款首次安装需在室温下清洁除尘门框并静置24小时不受力再使用，低温或潮湿环境粘贴当天开合易导致边角翘起脱落85% similarUnverified胶贴无痕架的黏胶在温度＜10℃时初粘力显著下降，冬季安装应先用吹风机预热墙面与胶片，粘贴后按压1分钟并静置24小时后再受力85% similarUnverified3M VHB双面胶粘贴式马桶锁需在光滑陶瓷面上安装，安装后必须静置24小时再受力，否则粘性未完全固化易脱落；温度低于10℃时粘贴不牢，冬季安装应先用吹风机加热贴合面84% similarUnverified无痕胶贴装挂钩粘贴后需静置24小时再承重，冬季低温（＜10℃）粘胶初粘力下降，安装时应用吹风机预热墙面提升附着84% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/226151API
curl https://kongchang.com/api/v1/knowledge/claims/226151MCP
get_claim(id=226151)