Unverified88% confidenceDecision RuleTime unknown
夹装式桌面屏风的夹口需匹配桌面厚度，主流夹口适配15-40mm厚度，若桌面厚度超过40mm（如实木大板、加厚办公桌）需确认支持加厚夹或选用免夹落地款
1
Sources
88%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified桌夹式支架安装的桌面厚度需在10-40mm范围内，超薄玻璃桌面（<10mm）或加厚岩板桌面（>40mm）需确认夹口开合范围，否则无法固定90% similarUnverified显示器桌夹式支架的夹口开合范围需匹配桌面厚度，标准夹钳适配10-85mm桌面，超薄岩板桌或超厚实木桌需确认夹口极限89% similarUnverified夹式桌面挂钩需匹配桌板厚度，常见夹口范围为1.5-6cm，购买前需实测桌板边缘厚度（含台面加固条），玻璃或钢化面板厚度往往超过4cm需选加大夹口款88% similarUnverified夹式（clip-on）支架固定在显示器或桌沿，适合小桌面但对桌板厚度有要求，常见夹口开合范围10-40mm，超厚桌板或玻璃桌面不适用86% similarUnverified桌角包套内槽卡口需匹配桌面板厚度，常见桌板厚度为18-25mm，选购前须实测桌角厚度，卡口宽度应比板厚小2-3mm以形成夹紧力，否则易脱落86% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/226529API
curl https://kongchang.com/api/v1/knowledge/claims/226529MCP
get_claim(id=226529)