Unverified80% confidenceDecision RuleTime unknown
桌面进深（前后深度）小于60cm时，穿孔式（grommet）安装比夹持式（C-clamp）更省空间，夹持式底座会占用桌面后沿约8-10cm深度
1
Sources
80%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified夹持式（C型夹）安装要求桌面厚度在10-60mm之间，且桌面下方需预留至少足够手拧螺丝的空间；穿孔式（Grommet）需桌面有开孔或愿意钻孔，但稳定性更高84% similarUnverified台面架深度超过30cm会明显侵占操作空间，标准橱柜台面进深约60cm，收纳架建议控制在深20-25cm，为切菜留出至少35cm操作区83% similarUnverified夹持式（C-Clamp）要求桌面边缘无阻挡且厚度在1-8cm之间，桌面下方10cm内需无横梁或抽屉；穿孔式（Grommet）更稳固但需在桌面打孔或利用现有走线孔80% similarUnverified地柜进深应≥40cm，若需放置功放、游戏主机、机顶盒等设备，进深需≥45cm并预留背部理线孔，进深＜35cm的窄柜无法容纳功放类设备80% similarUnverified托盘长边控制在台面深度的1/3以内，玄关柜通常深25-30cm，对应托盘长边选22-28cm避免超出边缘80% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/227617API
curl https://kongchang.com/api/v1/knowledge/claims/227617MCP
get_claim(id=227617)