Unverified88% confidenceDecision RuleTime unknown
断裂高发区在USB插头根部15-25mm处，保护套覆盖长度＜20mm则形同虚设，选择单端覆盖≥25mm、双端覆盖各≥20mm的款式才有实际防护意义
1
Sources
88%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified适配胶带宽度需预留2-3mm余量，标准封箱胶带48mm宽应选支持50mm或60mm的切割器，卡口过窄会导致胶带边缘卷曲、涂胶面沾滞77% similarUnverified尺寸预留原则：收纳套内腔应比充电宝各边大3-5mm，过紧会导致取放时反复摩擦接口、过松则失去防撞固定作用；标注支持10000mAh的套通常内腔约100×70×25mm76% similarUnverified宽度18-19mm是电工胶带主流规格，缠绕电线一圈可覆盖；<15mm窄带需多圈缠绕费时，>25mm宽带在细线上难以贴合弯角76% similarUnverified标准创可贴常规尺寸为72×19mm，指关节缠绕型约72×25mm，大号敷贴款可达56×72mm用于覆盖擦伤面；选购时按最常见伤口面积匹配，敷垫应比伤口大出至少5mm76% similarUnverified尺寸按线径选缠绕区：Φ3-5mm细线（充电线/网线）用宽度15-20mm；Φ6-10mm粗线（电源线）用25mm以上；缠绕区过短会导致标签翘边脱落74% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/237588API
curl https://kongchang.com/api/v1/knowledge/claims/237588MCP
get_claim(id=237588)