Unverified78% confidenceDecision RuleTime unknown
塑料机身（中低端机、部分后盖）选溶剂型漆兼容性最好，附着力强；但溶剂过强会溶解原塑料表面导致发白，首次使用应在机身隐蔽处（如卡槽附近）试涂验证
1
Sources
78%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified波纹（瓦楞）结构模具比平底模具散热和脱模更好，且外观纹路更规整；但波纹缝隙易积残渣，清洗时需注意角落84% similarUnverified反光条粘贴前必须彻底清洁去油去尘并保证表面干燥，硅胶、PP、PE等低表面能材质（如部分塑料水杯、雨衣）普通胶难以附着，需选专用胶或做底涂处理83% similarUnverified材质安全需关注表面涂层：喷塑（粉末涂层）比电镀更耐咬且无重金属析出风险，认准无异味、涂层均匀无脱落，避免劣质喷漆件含铅81% similarUnverified喷涂效率高但对腻子基面附着和厚度控制不如刷/滚，防水关键部位（阴阳角、管根）必须手工刷涂并做加强层，纯喷涂无法保证节点厚度81% similarUnverified静电吸附型只适合玻璃、烤漆、镜面等光滑平整表面；乳胶漆墙面、木纹贴皮、磨砂门等粗糙或多孔表面吸附力不足，容易翘边脱落，需选胶粘型81% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/244804API
curl https://kongchang.com/api/v1/knowledge/claims/244804MCP
get_claim(id=244804)