Unverified90% confidenceDecision RuleTime unknown
选购前必须实测门缝间隙：底部缝隙＜5mm选D型/P型自粘条，5-12mm选门底扫（门底挡风条），＞12mm的大缝需选可调节升降式门底密封；缝隙不匹配会导致门关不上或密封失效
1
Sources
90%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified遇门缝需求先测门体与门框吸合后的间隙宽度：标准防盗链适配3-15mm门缝，间隙过大需选带缓冲垫或可调底座的型号，否则关门后链座错位无法卡合89% similarUnverified门窗密封胶条按截面形状选：D型/P型密封间隙5-7mm，E型/I型间隙2-5mm，选错型号会导致关不严或压不实，购买前用硬币或塞尺测量门窗缝隙宽度85% similarUnverified门锚发泡垫需与门厚度匹配：常见门锚适用于35-50mm标准室内门，过厚防盗门或过薄空心门会导致门锚受力时挤压变形或从门缝滑脱，安装后应先低强度测试受力再进行全负荷训练83% similarUnverified购买前必须实测门厚（35-60mm为主流适配范围）、锁体类型（霸王锁体需专用款）、导向片方向和门框边距；防盗门装错锁体需大改甚至换门83% similarUnverified购买前需测量门与门框的贴合缝隙及门厚，防盗链两个安装座（门体+门框）需在同一水平线，错位＞2mm会导致链条张紧无法闭合门，安装座间距应匹配开门缝隙3-5cm82% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/262026API
curl https://kongchang.com/api/v1/knowledge/claims/262026MCP
get_claim(id=262026)