Unverified74% confidenceDecision RuleTime unknown
凹型贴合马桶底座的踏板需先测量马桶底座宽度：多数产品凹槽设计针对标准马桶底座，落地式（一体式）或大底座马桶可能无法贴合，购买前测量马桶底座最宽处与踏板凹口尺寸
1
Sources
74%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified购买前必须测量自家马桶口内径（前后长×左右宽）与外沿形状，方形/D形/异形马桶与通用椭圆款不兼容，搁置式增高器需卡入内圈，尺寸不符会晃动移位87% similarUnverified选购前需实测马桶盖板宽度：夹持/坐圈式扶手的内卡宽度需匹配马桶圈35-42cm的主流范围，智能马桶因盖板加厚且带电子元件，绝大多数夹持式扶手无法安装85% similarUnverified购买前需测量自家马桶坐圈内孔前后长度和左右宽度，多数产品适配内孔前后长度28-40cm；智能马桶或异形马桶（如无安装孔、盖板一体式）多数扶手无法螺丝固定85% similarUnverified马桶前U型/凹型垫的凹口深度需匹配马桶底座宽度，主流凹口约20cm，底座过宽的连体马桶应量座圈到地面距离再选，否则垫子卡不进83% similarUnverified购买前需测量自家马桶圈外沿尺寸，约40×38cm的通用规格适配大多数标准圆形/椭圆形马桶，但对异形马桶、加大号马桶圈覆盖可能不完整。82% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/282433API
curl https://kongchang.com/api/v1/knowledge/claims/282433MCP
get_claim(id=282433)