Unverified90% confidenceDecision RuleTime unknown
换芯前先量三个尺寸：锁芯总长度、以锁体固定螺丝孔为界的内外分段长度（如35+35、30+40）、锁体前后厚度，尺寸不匹配即使等级再高也装不上
1
Sources
90%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified网格线径≥4mm且间距≤35mm的网片才能稳定挂载S钩不易滑移，线径3mm以下的多为轻型装饰款，挂重物会明显变形下垂79% similarUnverified承接锅盖的插槽间距应≥3cm，才能同时兼容炒锅盖(30-34cm)与汤锅盖(20-24cm)不同弧度，间距过窄只能放同尺寸盖79% similarUnverified分格式落地锅盖架的插槽间距应≥3.5cm，间距过窄会导致带手柄凸起的锅盖插不到底、盖体外露占地79% similarUnverified钩口内径（开口宽度）需≥拟悬挂物挂环直径+3mm，橱柜挂杆常见杆径10-12mm，衣柜圆杆多为25mm，购买前必须实测杆径否则挂不稳或卡不进78% similarUnverified被套内径应比被芯大3-5cm，而非等大：被芯为200×230cm时选203×235cm的被套，留出余量避免撑得太满导致钻绒和结块，太大则被芯在内部滑动堆积77% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/329270API
curl https://kongchang.com/api/v1/knowledge/claims/329270MCP
get_claim(id=329270)