Unverified75% confidenceDecision RuleTime unknown
PP树脂抽屉式收纳柜单层建议不超过5层堆叠，层数过高底层抽屉受压变形卡顿，超需求应改用带钢架支撑的结构款
1
Sources
75%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
UnverifiedPP塑料抽屉柜的抽屉之间通常不可自由调整高度（模块固定），若需灵活分隔应选带可拆卸隔板的钢制或钢架布艺柜；宣称'可定制'的多指增购隔板而非无级调节88% similarUnverified堆叠超过4层的抽屉柜必须选带背板+顶板扣合结构或配防倒固定件的款式，纯堆叠款重心高，抽出上层抽屉时整体易前倾86% similarUnverified抽屉内高≤6cm的浅抽屉必须选无纺布软质折叠格（收纳后可弯曲贴合），硬质PP盒会因高度不足无法放入或压不实抽屉86% similarUnverified抽屉分隔格实测：选可自由裁剪的PP材质分隔板（厚度≥2mm）比固定格子适配性高，抽屉内净高需≥6cm才能放竖插式隔板，低于6cm只能用平铺格盘86% similarUnverified选择可伸缩式分隔格（弹簧张力固定型）适配非标准尺寸抽屉，伸缩范围应覆盖抽屉实际宽度且留有5cm以上余量，避免顶到极限失去张力85% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/334230API
curl https://kongchang.com/api/v1/knowledge/claims/334230MCP
get_claim(id=334230)