Unverified75% confidenceDecision RuleTime unknown
施工需预留误差和水膜工艺：裁剪时四周留2-3mm边距(避免翘边入水)，贴装用喷水+刮板排气，磨砂/凹凸压花玻璃不适合贴常规膜(贴不牢)
1
Sources
75%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified贴膜施工标准路径：清水加几滴洗洁精喷湿玻璃→揭膜同时喷湿膜背胶面→贴上后用刮板从中心向四周刮出气泡和水分→修边。湿贴法可留出调整时间避免气泡，干贴几乎无法一次贴平84% similarUnverified卷口封口方式需要至少卷折三次并扣紧才能达到标称防水效果，操作不到位会显著降低防水性能81% similarUnverified卷口封口方式需要至少折叠三次并扣紧才能达到标称防水效果，操作不到位会明显降低防水性能81% similarUnverified卷口至少折叠三次并扣紧才能实现有效防水密封，操作不当会导致进水，使用前需了解正确封口方法81% similarUnverified安装时必须用配套法兰密封圈或玻璃胶密封，底部四周打胶时应留一个缺口（观察口）以便漏水时及时发现，全周封死会导致底部渗水难以察觉79% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/351897API
curl https://kongchang.com/api/v1/knowledge/claims/351897MCP
get_claim(id=351897)