Unverified88% confidenceDecision RuleTime unknown
夹式挂钩的夹口张开范围需比桌面板厚度大5-10mm留余量，常见桌面厚15-40mm，钢化玻璃桌面多为8-12mm需选专用薄夹款
1
Sources
88%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified夹口最大开合尺寸需比被夹物厚度大3-5mm，桌面≤25mm板材选20-30mm开口的夹子，加厚桌板（40mm以上）必须专门确认开口上限，普通文具夹夹不住87% similarUnverified桌板厚度需在夹钳范围内（通常约10-60mm），玻璃桌面或过薄桌板不适合使用夹钳固定，需改用穿孔方式安装86% similarUnverified夹钳式安装要求桌板厚度10-60mm，玻璃桌面或超薄岩板桌（＜10mm）需改用穿孔式安装或加装衬板，否则夹持力不足易松脱85% similarUnverified18mm厚板材承重明显优于15mm，存放精装书/画册的隔板厚度应≥18mm，普通杂物用15mm即可，9mm薄板仅适合背板不适合做隔板84% similarUnverified抽屉导轨承重需按抽屉宽度选：宽度≤400mm选25kg级三节钢珠导轨，宽度400-600mm选35kg级，宽度＞600mm或存放锅具重物需选45kg以上重型导轨82% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/367964API
curl https://kongchang.com/api/v1/knowledge/claims/367964MCP
get_claim(id=367964)