Unverified85% confidenceDecision RuleTime unknown
去毛球器网罩孔径应≤4mm用于精细针织（羊绒、真丝混纺），孔径5-6mm用于厚毛衣，孔径过大易剪伤衣物、过小则处理效率低
1
Sources
85%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified刀网孔径0.8-1.2mm适合处理羊毛、针织等细软面料的毛球；孔径1.5mm以上适合厚重毛衣、毛毯等大颗粒毛球，但对薄面料易误剪破洞91% similarUnverified刀网孔径决定安全性与效率：孔径0.5-1mm适合羊绒、针织等细腻面料，孔径1.5mm以上更适合厚毛衣、毛毯等粗纤维，但对薄料易勾丝87% similarUnverified针扣直径超过1.2mm适合厚呢大衣、粗针织，1mm以下细针适合真丝、雪纺等薄面料，粗针扎薄料会留下永久性孔洞85% similarUnverified胸针尺寸建议控制在4-6cm，超过7cm易压垮薄面料且显厚重；针织衫、雪纺等轻薄面料应选5cm以内且带衬垫或双针固定的款式，避免留下明显针孔83% similarUnverified串珠/编织类墙饰套装若线材为纯棉粗绳（3-5mm）且预留长度≥成品尺寸的4倍，才能保证打结损耗后仍够用；廉价套装常按成品1.5-2倍配线导致中途缺料82% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/372558API
curl https://kongchang.com/api/v1/knowledge/claims/372558MCP
get_claim(id=372558)