Unverified80% confidenceDecision RuleTime unknown
选双面设计（粗面+细面）：粗面（约80-100目粒度）先去厚茧，细面（约180-240目）后期抛光收尾，单面产品需搭配磨砂膏才能达到同等平滑度
1
Sources
80%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified罗纹面料按针距分粗罗纹（2×2）和细罗纹（1×1），细罗纹更贴身细腻显精致，粗罗纹更休闲有版型；贴身内搭选细罗纹80% similarUnverified3–8cm混装规格偏小，粘贴前建议先在平整表面排版布局，避免贴出散乱感78% similarUnverified该产品尺寸规格偏常规小片，如果需要覆盖较大创面，需多片拼贴或另选大尺寸专用烫伤敷料76% similarUnverified打褶倍率影响成品用料与效果：2.0倍褶（成品宽×2=布料宽）为标准，1.5倍显平淡且拉开后遮不满，褶越密越挺括也越费布；全遮光建议至少2.0倍以保证拉合时无缝隙漏光76% similarUnverified台上盆边缘高出台面，视觉造型强但边缘接缝易积水垢，需选盆底与台面接触面小的款式（接触直径≤盆口60%）配合玻璃胶收边，清洁更省心76% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/377162API
curl https://kongchang.com/api/v1/knowledge/claims/377162MCP
get_claim(id=377162)