Unverified80% confidenceFactTime unknown
大尺寸板（60x120cm以上）金属款需背部预留5-10mm离墙间隙以插入挂钩背钩，购买前确认是否配安装码，否则挂钩无法插入
1
Sources
80%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified搁板长度超过60cm时，中间跨度过大易在承重后下垂，需增加中间支撑点或选用厚度≥25mm的板材，金属搁板还需注意板材回弹形变82% similarUnverified冷轧钢金属洞洞板常见板厚0.6-1.2mm，0.6mm偏薄易变形只适合轻物，工具墙建议选≥0.8mm并带背部加强筋的款式78% similarUnverified层架长度超过60cm且中间无支撑点时，木质/玻璃隔板易出现中部下垂，长隔板建议增加中间三角支架或选用金属加固层板，间距控制在40-50cm内78% similarUnverified金属置物架挂杆常见管径为12-16mm，选配挂钩时需匹配管径，太空铝挂杆内壁较薄承重不如实心不锈钢杆77% similarUnverified层板每80cm宽度应有中间支撑立板或加装金属层板托，无支撑的长跨度层板放满书后可能下弯3-5mm，选购时优先看是否有背板通槽或加固横梁设计77% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/384284API
curl https://kongchang.com/api/v1/knowledge/claims/384284MCP
get_claim(id=384284)