Unverified85% confidenceDecision RuleTime unknown
挂厚度2.5cm的圆管衣通杆时，S钩上开口内径需≥3cm才能顺利卡入，开口过小会撑不进或反复摩擦掉漆
1
Sources
85%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified分格式落地锅盖架的插槽间距应≥3.5cm，间距过窄会导致带手柄凸起的锅盖插不到底、盖体外露占地86% similarUnverified确认是否附挂钩：画廊框(3.8cm厚框)一般背面预装挂绳或锯齿挂钩可直接上墙;薄框成品需自备无痕挂钩,大尺寸(>80cm)需承重≥5kg的膨胀螺丝而非3M胶贴85% similarUnverified搁板悬臂越长下垂力矩越大：60cm以上长搁板建议板厚≥3.8cm且内嵌双钢管，或增加隐藏三角托，否则中部易挠曲变形84% similarUnverified隐藏搁板的悬挑力矩随长度增加而放大，同样承重下60cm搁板比30cm搁板对螺栓的拉拔力大一倍，长度>80cm时建议至少3个固定点且板厚≥30mm，否则中部易下垂84% similarUnverified挂杆间距≥4cm且杆径≤8mm时，丝巾对折悬挂不易压出深折痕；间距过密（<3cm）会导致相邻丝巾摩擦挤压84% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/384541API
curl https://kongchang.com/api/v1/knowledge/claims/384541MCP
get_claim(id=384541)