Unverified82% confidenceDecision RuleTime unknown
购买前需测量线槽内部净空高度，容纳标准插排（厚度约35-40mm）需内部净高≥45mm，很多超薄线槽内高仅20-30mm只能放线缆放不下插排
1
Sources
82%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified理线管/理线槽的内径需预留20%冗余：若线缆总直径约15mm，应选内径18mm以上产品，否则后期增加充电线时无法塞入，需整体拆除重装82% similarUnverified适用线缆直径应为扎带长度的1/4以内，例如捆扎直径20mm的电源线束，需选长度≥120mm的扎带，过短会绕不满一圈导致松脱81% similarUnverified线槽内径应预留线缆总截面积的40%余量：如4根HDMI/网线（每根约6mm）建议选内径≥20mm的线槽，塞满会导致后期无法增线和散热差81% similarUnverified选购前测量插线板实际尺寸并预留2cm冗余，主流托盘内径长度需≥28cm才能兼容6-8位大插线板，短款（20cm内）只能放小型4位板80% similarUnverified宽度越宽单圈覆盖大但缠绕小直径线材（如耳机线、细导线）时不服帖易起皱，细线用9~15mm、粗电缆用19~25mm更合适79% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/384860API
curl https://kongchang.com/api/v1/knowledge/claims/384860MCP
get_claim(id=384860)