Unverified82% confidenceDecision RuleTime unknown
门背挂式锅盖架需确认橱柜门板厚度，多数免打孔挂钩夹口适配16-20mm厚度门板，超薄或超厚门板会打滑脱落
1
Sources
82%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified衣柜内门（柜门较薄，通常16-18mm板材）不能用标准门厚挂钩，需选专用薄门挂钩内径≤20mm，否则松动脱落88% similarUnverified橱柜门内侧安装的挂架要核实门板厚度与开合间隙：挂架进深+瓶身直径需小于门板到柜内隔板的净空，否则关门顶瓶导致门关不严85% similarUnverified橱柜门内侧挂架要选深度≤8cm的薄款，否则关门时会顶住橱柜内的碗盘或抽屉，导致门关不严85% similarUnverified门后绕挂式收纳袋装满后向内凸起，需确认门与柜内隔板/衣物的间隙≥袋体厚度（通常8-12cm），否则关门时挤压导致线材受压或门变形84% similarUnverified嵌入橱柜/衣柜系统的转角架必须确认板厚与柜体一致（主流18mm），且五金孔距为国标32mm系统孔，否则无法与主柜共用侧板和铰链，导致转角处出现5-10cm无法利用的死角84% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/388646API
curl https://kongchang.com/api/v1/knowledge/claims/388646MCP
get_claim(id=388646)