Unverified83% confidenceDecision RuleTime unknown
固定件螺丝需拧入柜体板材时，板材厚度必须≥16mm；18mm颗粒板可用普通自攻螺丝，12mm薄板需配倒刺螺母或预埋件否则会滑牙
1
Sources
83%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified刨花板/密度板柜体侧板厚度＜16mm不建议装重载拉篮，螺丝固定点受力不足易松脱，需要18mm实木多层板或加装加固条87% similarUnverified钩口内径（开口宽度）需≥拟悬挂物挂环直径+3mm，橱柜挂杆常见杆径10-12mm，衣柜圆杆多为25mm，购买前必须实测杆径否则挂不稳或卡不进85% similarUnverified隐藏搁板的悬挑力矩随长度增加而放大，同样承重下60cm搁板比30cm搁板对螺栓的拉拔力大一倍，长度>80cm时建议至少3个固定点且板厚≥30mm，否则中部易下垂83% similarUnverified承重收纳（书籍、餐具）选18mm厚度以上颗粒板或多层实木，18mm单层隔板跨度不宜超过80cm否则长期受压会弯曲，需增加中间立板支撑83% similarUnverified悬挂式(嵌在隔板下方悬空)抽屉格利用死角空间但对隔板厚度有要求，隔板厚度需在4-6mm范围内才能卡稳，钢化玻璃隔板过厚或过薄都夹不住82% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/393278API
curl https://kongchang.com/api/v1/knowledge/claims/393278MCP
get_claim(id=393278)