Unverified75% confidenceFactTime unknown
挂杆（毛巾杆、衣杆）超过60cm长度时中间需加装支撑脚，否则受力下垂；304不锈钢挂杆壁厚≥0.8mm才能保证抗弯不变形
1
Sources
75%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified搁板悬臂越长下垂力矩越大：60cm以上长搁板建议板厚≥3.8cm且内嵌双钢管，或增加隐藏三角托，否则中部易挠曲变形86% similarUnverified搁板长度超过60cm时，中间跨度过大易在承重后下垂，需增加中间支撑点或选用厚度≥25mm的板材，金属搁板还需注意板材回弹形变83% similarUnverified插板式扶手的压固钢板长度通常需60-70cm以上并配防滑垫，钢板越长借助床垫压力越大越稳，短板款（＜50cm）侧向受力时更易翘起83% similarUnverified隐藏搁板的悬挑力矩随长度增加而放大，同样承重下60cm搁板比30cm搁板对螺栓的拉拔力大一倍，长度>80cm时建议至少3个固定点且板厚≥30mm，否则中部易下垂83% similarUnverified搁板悬空跨度（两个支架间距）超过60cm且为实木/中密度板时，中间易下弯变形，长搁板应选跨度≤60cm并增加中间支撑或改用金属托架83% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/397820API
curl https://kongchang.com/api/v1/knowledge/claims/397820MCP
get_claim(id=397820)