Unverified80% confidenceFactTime unknown
钢制层架的层板厚度直接影响承重与是否变形，重载层架层板钢板厚度应≥0.6mm或采用加强横梁；网格层板放小物易掉落需加铺板
1
Sources
80%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified承重不足的层板放置多台主机+功放会下弯变形，木质层板跨度超过60cm且承重需求>15kg时应选钢制层板或加中间支撑，钢化玻璃层板注意标称承重多为均布承重非点承重84% similarUnverified不锈钢盆的实际重量和板材厚度正相关，同尺寸越轻通常板材越薄越易变形；0.5mm以上钢板挤压不易凹陷，特别薄的款式端满水会晃动变形84% similarUnverified落地置物架单层承重看层板厚度和支撑结构：钢丝网层≥25kg/层，1.0mm冲孔钢板≥15kg/层，玻璃层板放重物易碎需≥8mm钢化玻璃84% similarUnverified搁板长度超过60cm时，中间跨度过大易在承重后下垂，需增加中间支撑点或选用厚度≥25mm的板材，金属搁板还需注意板材回弹形变83% similarUnverified层板跨度越大越容易下弯，宽度超过80cm的单层建议中间加立柱支撑或选加厚层板（钢≥1.0mm、木≥18mm），否则放重物必然弯曲82% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/397865API
curl https://kongchang.com/api/v1/knowledge/claims/397865MCP
get_claim(id=397865)