Unverified82% confidenceDecision RuleTime unknown
水晶内雕（3D激光内雕）分辨率取决于打点密度，选购时确认激光点间距≤0.1mm，低于此参数人像五官会出现明显颗粒感和层次断裂
1
Sources
82%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified激光测距仪的测量精度通常标注为±1.5mm或±2mm(在特定量程内)，标称最大量程需在理想反射条件下才能达到,深色/透明表面会显著缩短有效距离75% similarUnverified悬挂式激光玩具的投射高度决定覆盖面积，安装高度应为2-2.5米，过低（＜1.5米）会导致光斑移动范围过小失去引诱效果73% similarUnverified激光光源存在散斑现象，近距离大尺寸投射时部分用户可感知轻微散斑颗粒感，对画面细腻度极度敏感者需实际体验后再决定72% similarUnverified内雕水晶摆件（激光在水晶内部打点成像）适合定制照片/头像，成像清晰需水晶纯净无气泡，尺寸建议8cm以上否则内雕图案分辨率不足看不清脸71% similarUnverified真4K分辨率搭配激光光源，在同价位段画面细腻度表现突出，适合大尺寸投射下对清晰度有要求的用户70% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/400834API
curl https://kongchang.com/api/v1/knowledge/claims/400834MCP
get_claim(id=400834)