Unverified85% confidenceDecision RuleTime unknown
徽章直径＜25mm时避免设计过细的文字或线条，金属模具冲压最小线宽约0.3mm，过细的细节会糊掉或断裂
1
Sources
85%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified尺寸按线径选缠绕区：Φ3-5mm细线（充电线/网线）用宽度15-20mm；Φ6-10mm粗线（电源线）用25mm以上；缠绕区过短会导致标签翘边脱落78% similarPartially Verified仅适配宽度≤19mm的窄幅文具胶带，需要切割宽封箱胶带（如48mm）的用户不适合78% similarUnverified金属相框边框窄(通常5-10mm)显现代精致，但抗跌落性差、边角磕碰易变形留印；木质框边框厚(15-30mm)耐用有质感但占用视觉空间，小尺寸照片用宽木框会显得照片更小77% similarUnverifiedKapton胶带越薄（如0.025mm）越贴合芯片间隙、遮蔽精度高，但抗撕拉差易断；厚款（0.06mm以上）耐用但边缘遮挡时易翘起，精细遮焊选薄款77% similarUnverified网格线径≥4mm且间距≤35mm的网片才能稳定挂载S钩不易滑移，线径3mm以下的多为轻型装饰款，挂重物会明显变形下垂77% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/407558API
curl https://kongchang.com/api/v1/knowledge/claims/407558MCP
get_claim(id=407558)