Unverified85% confidenceDecision RuleTime unknown
钻孔直径应比铆钉标称直径大0.1-0.2mm，如4.0mm钉钻4.1mm孔，孔过大抓握力骤降易松动，孔过小则拉不进去
1
Sources
85%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified金属烤漆洞洞板标准孔距多为25.4mm(1英寸)或35mm，购买配件前必须确认孔距，不同孔距配件无法通用，是选购踩坑重灾区78% similarUnverified珠孔直径与穿绳直径差需≥1.5mm，孔太小2-3岁孩子穿不进易受挫，孔太大珠子易滑落；大孔木珠孔径建议8-10mm配棉绳75% similarUnverified洞洞板主流规格为孔径6mm、孔距25mm或40mm，材质分密度板（便宜易受潮）、金属（承重强）、亚克力（防水适合厨卫）三类75% similarUnverified拉链头装饰的连接环内径需比拉链孔直径大1-2mm，否则装不进；常见夹克/箱包拉链孔孔径为3-5mm，需选连接环内径≥5mm的款式74% similarUnverified撬片越薄越易插入窄缝但越易弯折失效，0.2mm是通用性与耐用性的平衡点，超薄0.05mm仅适合精细开缝73% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/408216API
curl https://kongchang.com/api/v1/knowledge/claims/408216MCP
get_claim(id=408216)