Unverified78% confidenceDecision RuleTime unknown
尺寸适配以浴缸/淋浴区内净尺寸减2-3cm为宜，过大边缘上翘反而绊脚；带排水孔设计（镂空网格）的垫子积水少更防滑，实心整片款需选带导流槽的
1
Sources
78%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified尺寸并非越大越好：应比淋浴区实际站立范围大10-15cm，四周与墙留2-3cm排水缝，铺满整个浴室反而导致边缘翘起绊倒和垫下积水91% similarUnverified淋浴区站立防滑垫厚度建议6-8mm并带排水孔或导流槽设计，过薄（<3mm）缓冲不足且易随水流卷边，过厚则积水难排91% similarUnverified淋浴房内部专用防滑垫应带排水孔且吸盘牢固，尺寸需覆盖站立区（一般≥50×80cm），过小的垫子边缘易翘起绊倒90% similarUnverified尺寸不是越大越好：垫子长度应比浴缸底部平坦区短5-10cm，两端不能延伸到浴缸弧形侧壁上，否则吸盘悬空无法吸附反而更易滑动90% similarUnverified尺寸选择：垫子应比淋浴区/浴缸底小2-3cm留出排水边缘，过大会盖住地漏导致积水回流；成人淋浴区常规适配尺寸约50×70cm或60×90cm，浴缸内垫需匹配浴缸弧底选带吸盘的窄长款89% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/409953API
curl https://kongchang.com/api/v1/knowledge/claims/409953MCP
get_claim(id=409953)