Unverified80% confidenceDecision RuleTime unknown
面点切割/分割用不锈钢平口刮板（厚度0.8-1.2mm），过薄易变形，过厚切割面团时费力且不利刃口贴案板
1
Sources
80%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified不锈钢刮板刃口越锋利分割越利落，但过薄刃口易变形卷刃且刮擦不粘锅涂层易划伤；用于不粘烤盘/涂层锅应选塑料软刮板83% similarUnverified36英寸款可通过剪刀裁剪适配不同部位，但裁剪后铝合金边缘可能出现锐口，需用胶带包边处理80% similarUnverified刀片选不锈钢材质(304及以上)且需带刀片护盖收纳设计，塑料刀片切2-3次即钝无法保证断面平整79% similarUnverified优质纸板拼片厚度应≥2mm，切割采用模切工艺使卡扣紧密不松散；厚度<1.5mm的拼图拼合后容易滑动散架，影响成就感79% similarUnverified扁平乳胶带优先选多层贴合工艺（layered）而非单层切割（cut），单层切割带一旦边缘出现小裂口会在拉伸中迅速撕裂断裂78% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/443725API
curl https://kongchang.com/api/v1/knowledge/claims/443725MCP
get_claim(id=443725)