Unverified50% confidenceFactExact time
主流单目深度估计模型的误差通常在厘米量级，与Pheno4D的0.012mm精度相差三个数量级以上
1
Sources
50%
Confidence
Long-term
Relevance
7/16/2026
First Seen
Sources
Related Claims
Unverified0.1g精度秤在标称量程末端（如3kg机型称到2.5kg以上）误差会放大到±2-3g，重物精称需求应选量程冗余机型，即最大称重需求不超过量程的60%73% similarUnverified标称0.1g精度但5kg大量程的秤要警惕，量程越大分度值越大时误差越明显，真正0.1g稳定读数的一般量程不超过3kg67% similarUnverified0.1g精度秤的实际稳定量程通常只在500g-1kg内，超过后误差放大，需要称大件（如整块肉）时应选1g精度的3-5kg量程款65% similarUnverified0.1g精度秤的实际量程通常只到500g-3kg，而1g精度秤可到5kg-10kg，同一台秤精度越高最大量程越受限，需按最常称的重量段选择64% similarUnverifiedQ4量化可将模型体积压缩至原来的约1/8，代价是约1-3%的基准测试精度损失64% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/532200API
curl https://kongchang.com/api/v1/knowledge/claims/532200MCP
get_claim(id=532200)