Unverified80% confidenceDecision RuleTime unknown
深蹲架内部立柱间距（宽度）需≥110cm才能容纳标准奥杆卧推与深蹲的握距空间，间距过窄会导致握杆时手碰立柱
1
Sources
80%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified深蹲架挂钩孔间距（调节孔距）越密越好，理想为5cm以内，孔距超过8cm时卧推起始高度可能卡在不合适位置，导致出杆吃力或过度耸肩87% similarUnverified抽拉式（层板可调）比翻斗式收纳率高、可放高帮靴，但需要留出抽拉/开门空间，深度通常≥30cm；玄关进深<80cm的窄过道优先选翻斗或推拉门结构83% similarUnverified托盘长边控制在台面深度的1/3以内，玄关柜通常深25-30cm，对应托盘长边选22-28cm避免超出边缘83% similarUnverified层板深度＜15cm适合放手办、香薰等小件；放置书籍或相框需深度≥20cm；深度超过25cm的搁板对膨胀螺丝的力臂拉扯增大，建议加三角支撑或斜拉件83% similarUnverified选购伸缩隔板时，实际内空需落在标称伸缩范围的中段（如标称60-90cm，实际隔板内宽最好在68-82cm之间），顶到两端极限时弹簧张力不足，稳固性骤降82% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/556585API
curl https://kongchang.com/api/v1/knowledge/claims/556585MCP
get_claim(id=556585)