Unverified90% confidenceDecision RuleTime unknown
夹持直径31.8mm为公路车主流标准，但不兼容部分老款25.4mm或超大径把立，购买前需确认把立夹持规格
1
Sources
90%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified仅适配22.2mm标准把径，购买前需确认车把直径；若为31.8mm或25.4mm超大径车把则无法使用92% similarUnverified夹持直径必须与把立匹配：31.8mm是公路/山地主流标准，25.4mm为老式或复古车规格，两者不通用，购买前务必确认原把立口径92% similarUnverified仅适配22.2mm标准平把，不兼容31.8mm公路弯把或超大径把，购买前需确认车把直径90% similarUnverified适配标准22.2mm把径，购买前需确认车把外径是否为标准尺寸；若使用oversized（如31.8mm裸管段）或特殊把径车把则无法安装90% similarUnverified仅适配22.2mm标准把径，无法直接安装在超大把径(如35mm)车把上，需确认车把规格89% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/648332API
curl https://kongchang.com/api/v1/knowledge/claims/648332MCP
get_claim(id=648332)