Unverified95% confidenceDecision RuleTime unknown
35mm夹径设计，仅兼容35mm车把，不兼容传统31.8mm车把，购买前需确认车把夹径匹配
1
Sources
95%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified孔径31.8mm为当前公路车主流规格，购买前需确认车把夹径匹配，不兼容26.0mm或35mm规格车把92% similarUnverified把立孔径（夹持车把中心区直径）必须与车把匹配：公路车主流为31.8mm，老款或部分入门为25.4mm，新款空气动力车把出现35mm，购买前务必确认三者一致否则无法安装79% similarUnverified把径为标准22.2mm，购买前确认车把夹持区域规格；若使用非标把径或需要集成SRAM变速（MatchMaker兼容），需另购转接座79% similarUnverified购买前需确认车把直径是否在支架夹具适配范围内，常规圆管车把（约22-32mm）基本兼容，异形车把或加粗把径需额外确认77% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/648558API
curl https://kongchang.com/api/v1/knowledge/claims/648558MCP
get_claim(id=648558)