Unverified95% confidenceDecision RuleTime unknown
三孔螺栓安装需要前叉上有对应螺孔（标准three-pack mounts），购买前必须确认前叉是否预留三颗M5螺丝孔位
1
Sources
95%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified安装需配合1.4mm螺丝，购买前须确认原镜框螺丝孔径一致，否则无法安装77% similarUnverified购买前需确认龙头管径是否在支架夹具兼容范围内，五匹不同型号适配的管径区间不同，部分粗管径或异形龙头可能无法直接安装75% similarUnverified买前需确认座管直径和后轴类型（快拆杆/桶轴）是否兼容，桶轴车型需额外适配件或可能不兼容74% similarUnverified安装方式为座管夹/座杆夹，对气动座管或异形座管的兼容性一般，购买前需确认座管形状是否适配71% similarUnverified安装前需确认车顶架横杆间距在产品兼容范围内，U型螺栓通用安装方式对横杆截面形状有一定限制，圆管横杆兼容性优于异形截面横杆71% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/666373API
curl https://kongchang.com/api/v1/knowledge/claims/666373MCP
get_claim(id=666373)