Unverified90% confidenceDecision RuleTime unknown
金属网眼间距应≤2.1mm（符合标准），过大间距可能让断裂剑尖穿入；网面出现凹陷、锈蚀或变形应立即更换，不可自行敲平复用
1
Sources
90%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified皮卡货斗（约1.5×1.3m标准斗）固定推荐网眼35-50mm的乳胶弹力网配6-8个金属挂钩；小件多的碎货应选网眼≤25mm避免漏出75% similarUnverified网线越细越隐形但强度越低，直径<1mm尼龙线易被猫爪勾断，防坠场景应选≥2mm尼龙或钢丝加固73% similarUnverified钢丝绳式限位器的钢丝直径应≥2mm，包胶处理可防止刮花窗框与钢丝生锈；细于1.5mm的钢丝在成人误拉或被撬时易断70% similarUnverified钉眼、螺丝孔等小于5mm的点状缺陷，用现成膏状补墙膏即可；裂缝或超过5cm²的破损面积，需用墙面修补石膏（粉状调配）分层填补，单层厚度控制在2mm以内避免开裂70% similarUnverified加固锅柄的金属固定片（连接锅体部分）厚度应≥1.5mm，薄于1mm的固定片在提起满水重锅时易变形弯折，是脱落隐患的主因70% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/74058API
curl https://kongchang.com/api/v1/knowledge/claims/74058MCP
get_claim(id=74058)