Unverified82% confidenceDecision RuleTime unknown
领口罗纹应为双层螺纹（1x1或2x2罗纹）且宽度1.5-2cm，这类领口洗后不易松垮外翻；单层平车领口穿几次就会波浪变形
1
Sources
82%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified领口罗纹要选双层包边或1x1螺纹且高度≥1.5cm，单层薄罗纹洗几次就波浪变形，是判断基础款做工的关键细节84% similarUnverified领口选1.5cm以上的双层螺纹罗纹（含少量氨纶3%-5%），单层平纹领洗涤后极易起波浪不回弹84% similarUnverified搁板悬臂越长下垂力矩越大：60cm以上长搁板建议板厚≥3.8cm且内嵌双钢管，或增加隐藏三角托，否则中部易挠曲变形74% similarUnverified常见开口螺旋缠绕管以2米/卷为主流规格，可自行剪裁；一体套管长度多为1米/1.5米固定规格，购买前需测量实际线材裸露长度预留20%余量74% similarUnverified树脂拼装柜的隔板厚度通常1-2mm，厚度≥1.5mm且带加强筋结构的隔板抗弯性明显更好；选购时可看隔板反面是否有网格加强筋73% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/86152API
curl https://kongchang.com/api/v1/knowledge/claims/86152MCP
get_claim(id=86152)