Unverified85% confidenceDecision RuleTime unknown
钢圈开口宽度需覆盖整个乳房基底围，钢圈应贴合胸骨中央且不压迫乳房组织；大罩杯人群钢圈飞起（未贴胸壁）通常说明罩杯偏小或下围偏大
1
Sources
85%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified钢圈开口宽度需匹配下胸围底盘：钢圈过窄会压迫乳房外侧造成副乳外溢，理想状态是钢圈末端刚好卡在乳房与手臂交界处，试穿时抬手钢圈不刺痛才算合适91% similarUnverified钢圈定制的钢圈弧度和开口宽度按乳房底盘实际尺寸弯制，比无钢圈更适合大罩杯（D+）承托，但对肋骨外扩或钢圈过敏者应选定制无钢圈款86% similarUnverified文胸出现钢圈上移压肩、后带上滑、罩杯外扩溢出，多为底围偏大或罩杯偏小，应减小底围码同时增大罩杯（如80B换75C，姐妹杯原理）80% similarUnverified作为中间层叠穿的防污马甲，胸围应比常规同码大4-6cm留出内搭空间，且袖窿要深，否则套在厚卫衣/抓绒外会勒肩、限制手臂活动79% similarUnverified作为内搭中层的背心应选修身版型且袖窿(armhole)开口大，避免叠穿在毛衣外时胸部堆积臃肿，肩线不宜过宽78% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/94753API
curl https://kongchang.com/api/v1/knowledge/claims/94753MCP
get_claim(id=94753)