ENIAC
One of the earliest general-purpose electronic computers, constructed in 1945 using vacuum tube technology. Programs were configured manually through patch panels and switches. ENIAC did not implement a stored-program architecture.
Timeline (last 90 days)
The topic of whether ENIAC had a BIOS received 144 upvotes and 42 comments on Hacker News.
ENIAC had no BIOS because it did not have a stored-program architecture, and the concept of BIOS was not applicable in its era.
ENIAC is one of the world's earliest general-purpose electronic computers, and its programming was accomplished through manual configuration of plugboards and switches.
ENIAC was built in 1945, occupying approximately 167 square meters, weighing 30 tons, and using approximately 18,000 vacuum tubes.
ENIAC operated in decimal rather than binary, and consisted of 20 accumulator units, each capable of storing one 10-digit decimal number.
ENIAC set data flow paths and computation sequences through approximately 6,000 switches and a large number of patch cables.
After 1948, ENIAC was modified to gain limited read-only function table storage capability, allowing some instructions to operate in a manner closer to a stored-program approach.
In the von Neumann architecture, programs and data share the same memory space, which is fundamentally different from ENIAC's physical wiring-based programming.
ENIAC是世界上第一台通用电子数字计算机，1946年由宾夕法尼亚大学为美国陆军弹道研究实验室建造，重达30吨，最初用途是计算炮弹弹道
All Facts (8)
In the von Neumann architecture, programs and data share the same memory space, which is fundamentally different from ENIAC's physical wiring-based programming.
50%UnverifiedENIAC had no BIOS because it did not have a stored-program architecture, and the concept of BIOS was not applicable in its era.
50%UnverifiedENIAC is one of the world's earliest general-purpose electronic computers, and its programming was accomplished through manual configuration of plugboards and switches.
50%UnverifiedENIAC was built in 1945, occupying approximately 167 square meters, weighing 30 tons, and using approximately 18,000 vacuum tubes.
50%UnverifiedENIAC operated in decimal rather than binary, and consisted of 20 accumulator units, each capable of storing one 10-digit decimal number.
50%UnverifiedENIAC set data flow paths and computation sequences through approximately 6,000 switches and a large number of patch cables.
50%UnverifiedAfter 1948, ENIAC was modified to gain limited read-only function table storage capability, allowing some instructions to operate in a manner closer to a stored-program approach.
50%UnverifiedENIAC是世界上第一台通用电子数字计算机，1946年由宾夕法尼亚大学为美国陆军弹道研究实验室建造，重达30吨，最初用途是计算炮弹弹道
50%