pull-up resistor
A pull-up resistor is a circuit component that connects a digital pin to a high voltage level through a resistor, used to stabilize the level of a floating pin.
Timeline (last 90 days)
The Raspberry Pi GPIO has a built-in weak pull-up resistor of about 50kΩ, which can hold the pin's default state stably at a 3.3V high level; when an external switch closes to ground, the pin is pulled low to 0.
With long wires or in strong-noise environments, the Raspberry Pi's internal weak pull-up may still cause false triggers, and an external 4.7kΩ~10kΩ pull-up resistor can be added to enhance noise immunity.
All Facts (2)
The Raspberry Pi GPIO has a built-in weak pull-up resistor of about 50kΩ, which can hold the pin's default state stably at a 3.3V high level; when an external switch closes to ground, the pin is pulled low to 0.
50%UnverifiedWith long wires or in strong-noise environments, the Raspberry Pi's internal weak pull-up may still cause false triggers, and an external 4.7kΩ~10kΩ pull-up resistor can be added to enhance noise immunity.
50%