Unverified82% confidenceDecision RuleTime unknown
夹式支架的开口夹持范围需覆盖6-14mm（经济舱小桌板厚度多在8-12mm），若仅支持≤8mm则夹不稳廉价航空的薄塑料桌板
1
Sources
82%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified夹口最大开合尺寸需比被夹物厚度大3-5mm，桌面≤25mm板材选20-30mm开口的夹子，加厚桌板（40mm以上）必须专门确认开口上限，普通文具夹夹不住85% similarUnverified夹式挂钩的夹口张开范围需比桌面板厚度大5-10mm留余量，常见桌面厚15-40mm，钢化玻璃桌面多为8-12mm需选专用薄夹款82% similarUnverified桌板厚度需在夹钳范围内（通常约10-60mm），玻璃桌面或过薄桌板不适合使用夹钳固定，需改用穿孔方式安装81% similarUnverified夹钳式安装要求桌板厚度10-60mm，玻璃桌面或超薄岩板桌（＜10mm）需改用穿孔式安装或加装衬板，否则夹持力不足易松脱81% similarUnverifiedL型/直角防撞角适配桌面板厚度有限，多数产品内槽适配18-40mm板厚；超厚岛台或飘窗台（≥50mm）需选择包边型或球型贴片而非卡槽式80% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/120241API
curl https://kongchang.com/api/v1/knowledge/claims/120241MCP
get_claim(id=120241)